
Flexures Block Gauge "AU" and "DU"
Flexure block gauge is ideal for very high volume and high precision applications such as bearing components gauging. It is often the best solution for measuring moving materials, such as roughness testing.
AU : With inductive probe
DU : With digital probe
Flexure block gauge is ideal for very high volume and high precision applications such as bearing components gauging. It is often the best solution for measuring moving materials, such as roughness testing. There are no sliding parts to wear out or to cause friction within the frame or sensor which makes Metro flexures virtually free from hysteresis.
Flexures can be mounted such that there is little or no stress through the gauge center line and enabling precision profiling of moving material, such as sheet material or rotating shafts, brake discs etc. The flexure gauge has forward and reverse spring action with a pneumatically actuated version available for automatic measurements
- Measuring range : ±0.5 et ±10 mm
- Repeatability : < 0,1 µm
- Inductive or digital probe
- High precision measurement
- Spring push or pneumatic actuation
- IP Rate : IP65
- Aluminum and stainless steel construction
- Wide range of contact tips
- Extended operation life > 20 million cycles

For optimal gauging performance the recommended operation is on center. The specification is valid when using Metro standard tool holder, tip holder and tip. (Tip used is 6.35 mm TC Ball Tip)
- Repeatability on center : < 0.1µm
- Repeatability off center : < 0.5µm

